• What Is Compressed Air Used For In Hospitals?

    Medical Air System in San Jose, CA

    Medical Air Compressors

    Unless you are work in hospital maintenance, you might never guess the extent to which hospitals rely on compressed air. These air systems are imperative for a large number of critical end-uses, so much so that any problems with the delivery or quality of compressed air in a hospital can jeopardize patient health and safety. If you’re curious about how hospitals rely on compressed air, here is a brief look at some of the specific places and functions within a hospital that demand compressed air. If you work in a medical setting and are researching air compressors, contact an air compressor supplier in San Jose that specializes in medical-grade compressed air systems.

    The Operating Room
    There is perhaps no more critical end-use of compressed air within a hospital than the operating room. Compressed air is used to help keep the patient comfortable and breathing, and can also prove critical in the operation and performance of certain handheld medical tools and devices. Because compressed air in situations when contamination can lead to infection, illness, and even death, it is essential that hospitals have good compressed air filtration systems and testing procedures in place.

    The Air Filtration Duct System
    For the health of patients, healthcare providers, and hospital guests alike, the air filtration system inside of a hospital requires the purest, driest air possible. High-quality, medical-grade air compressors provide that, ensuring clean and sanitary air for everyone within the hospital.

    The Maintenance Department
    In any setting, nothing cleans dusty spaces better than compressed air. This is true in hospitals as well, in addition to the fact that compressed air is used for many tools that aid in the repair, replacement, and maintenance of hospital equipment. Hospital maintenance departments, like any other, use compressed air for impact hammers, nail guns, and many other air-driven hand tools. Compressed air is also used to inflate emergency mattresses and wheels on service carts and wheelchairs.

    How Hospitals Run on Compressed Air

    Facts About Air Compressors in Hospital Settings
    Hospitals of all sizes use compressed air for lots of important ends uses relating to day-to-day operational functions. In addition to functions related to primary care, compressed air is also used for everything from laundry and air conditioning to general hospital maintenance. Considering the important role compressed air plays inside a hospital setting, it’s important that you understand some of the important points regarding medical air compressor systems. Whether you’re a hospital manager, a building planner, or an operations contractor, here are some things to know about air compressors in hospital settings.

    Compressed Air Quality
    One of the first and most important concerns for air compressors in hospital settings is the quality of the compressed air available at the end-users within the hospital. For those users that are directly involved with patient care, clean and sanitary air is absolutely necessary. Contaminated air can put patients at risk, and may also open up your hospital to malpractice claims if an injury or death is attributed to contaminated air.

    Type of Air Compressor
    There are many different types of commercial- and industrial-grade air compressors that make sense for hospital settings. The selection of air compressors depends on multiple factors, including point of use, full load air capacity, and the frequency of use. The worst-case scenario must also be taken into account when designing an air compressor system to safeguard against the loss of compressed air during a power loss. Standby compressor capacity is most important for highly critical compressed air end uses.

    Air Compressor Inefficiencies
    Because of the widespread use of air compressors in hospital settings, it’s vital for facilities managers to address air compressor inefficiencies that can end up costing thousands of dollars or more annually in wasted air usage. Air compressor inefficiencies can also put additional wear and stress on compressed air systems, which can lower the compressor’s lifespan.

  • Troubleshooting Air Compressor Retrofitting

    Problems In Your Compressed Air System In San Jose

    Troubleshooting Common Pressure Problems

    One of the common misconceptions about air compressors is that they somehow manufacture pressure. In fact, compressors only pump air in a system that creates back pressure against which the compressor pumps. When the pressure is higher than necessary, it creates wasted energy in the system, which means inefficient performance and higher operating costs. Low system pressure can also affect performance at both the supply side and demand side of an air compressor system. For these reasons, it’s important that you learn how to troubleshoot the pressure problems you experience in your air compressor system. If the problem persists or you are unable to identify its cause, contact an air compressor repair company in San Jose.

    Determine Which Applications are Driving System Pressure

    If you are experiencing consistent pressure problems in your compressed air system, the first step should be to determine which applications are the most sensitive to pressure fluctuations, which in turn are most likely to be driving changes in system pressure. Depending on the size of your operation and whether or not you have a dedicated compressor operator, you may need to contact an air compressor repair company to determine which components should be inspected first.

    Look for Pressure Drops at Point-of-Use Components

    If you cannot determine which applications are specifically driving system pressure changes, look for pressure drops at the point-of-use components within your air compressor system—i.e., the filter, regulator, lubricator, and final hoses. Installing delta pressure measuring instruments at these components can help you identify pressure changes and thus identify where to focus your repair/adjustment efforts.

    Schedule Professional System Inspection

    Unless you have a dedicated in-house air compressor operations team, the fastest and easiest way to troubleshoot pressure fluctuations within your air compressor system is to schedule a professional inspection with an air compressor repair company in San Jose. These experts can quickly identify the cause of your pressure issues and make the necessary repairs, adjustments, or retrofits to get your air compressor system back up and running in no time.

    A Look at Air Compressor Retrofitting

    If your business has outgrown your existing air compressor system, you have two options: invest in a brand-new air compressor setup or retrofit your existing system to meet your current and future needs. Depending on the size and complexity of your existing system, a retrofit may be more cost-effective than installing a brand-new air compressor system. Retrofitting your existing air compressor system requires a complete evaluation of your system, including both the supply and demand sides and all of the individual components. The main goals of an air compressor retrofit are to increase reliability, increase performance, decrease maintenance, and decrease the operating costs of the compressed air system while maintaining quality.

    Evaluating your air compressor system and designing a retrofit plan requires representatives from your energy utility (gas or electric) and a compressed air systems supplier in San Jose. Utility representatives and air compressor experts will work together to identify equipment upgrades, pressure control changes, and supply/demand-side retrofits that will improve your current air compressor system to meet your current and expected future needs.

  • Common Questions About Advantages Of Air Compressors

    Learn More About Air Compressors in San Jose

    Answering Some Common Questions About Air Compressors

    If you are shopping for a capable and versatile device to include in your workshop or garage, you may want to consider purchasing an air compressor. Air compressors can be used for many different tasks, ranging from household projects to inflation and more. A company offering air compressors for sale in San Jose can help you select the perfect air compressor for your needs. After your compressor purchase, you will be amazed at the usefulness of this device. To highlight the advantages of purchasing an air compressor, here are the answers to some commonly asked questions about compressors.

    What Are Air Compressors Used For?

    When you are considering the purchase of an air compressor, you may wonder about how you will use this device. In fact, an air compressor can be used for many different applications around your workshop or garage. For example, compressors can be used to inflate tires and sports balls. With air tool attachments, air compressors can also be used for woodworking, construction, painting, and more.

    What Are The Advantages of Air Tools?

    There are many reasons to use air tools for your projects. When you purchase air tools, your tools will provide you with more power and performance than traditional tools. Pneumatic devices, such as an air nail gun, will allow you to accomplish your project more easily and efficiently. In addition, air tools can often be purchased at a lower price than conventional tools. For this reason, air tools are a budget-friendly and energy-saving choice for all of your projects.

    What Should I Look For In a Compressor?

    There are several important factors to consider when you are shopping for an air compressor. As you are reviewing compressor models, it is a great idea to evaluate their CPM or Cubic Feet Per Minute rating. A compressor with a higher CFM rating will offer additional power. Along with CFM, you should also consider whether you would prefer a gas or electric compressor. Your air compressor specialist can help you choose the right model for your upcoming projects.

    If you are looking for a great way to save time and effort during your construction or carpentry project, you may want to consider purchasing an air compressor. Air compressors are incredibly useful tools that can be used to power air tools and a variety of other attachments. In addition, your air compressor will last you for many years to come. After you purchase an air compressor for sale in San Jose, you will be amazed at your newfound abilities. To highlight the great advantages of purchasing an air compressor, here is an overview of some terrific benefits that air compressors have to offer you.

    A Look at How Air Compressors Work & Their Advantages In San Jose

    Speed Up Work Around the House

    If you are the type of person who prefers to perform maintenance and repairs yourself, you will be amazed at how much an air compressor is able to assist you. A new air compressor can be used to speed up many different projects around the house. For example, you can use your compressor to hang crown molding, finish basement walls, and perform a wide variety of other tasks.

    Ease of Maintenance

    Air compressors are highly powerful machines that are also remarkably easy to maintain. With a few routine maintenance procedures, you can keep your air compressor running well for many future projects. Some of the simple maintenance procedures to keep in mind for your air compressor include draining excess moisture and changing the filter and oil. If you purchase an oil-free compressor, your unit will not require oil changes.

    Versatile Tool Selection

    After you select your new air compressor, you will have a versatile range of air tools at your disposal. Depending on your planned projects, you may want to select air nail guns, staplers, or other handy tools. Some other popular tools include air-powered sanders, drills, and screwdrivers. With an arsenal of air tools in your toolbox, you will be prepared to tackle any task.

  • How Do You Maintain An Air Compressor?

    Signs and Tips for Servicing Your Air Compressor in San Jose

    Signs Your Air Compressor Needs To Be Serviced

    Regardless of the size of your compressed air system, if you rely on compressed air for any reason related to your day-to-day business operations it’s important that you learn to recognize the signs of compressor trouble. As your air compressor goes out, it will run less efficiently and the performance output will drop, both of which can cost you money. If you recognize any of these following signs, contact an air compressor repair provider in San Jose.

    Excessive Compressor Noise

    One of the most obvious signs that your air compressor needs to be serviced is excessive noise during operation. A noisy operation can be caused by multiple things, including loose components that need to be tightened, lack of oil in the crankcase, or foreign matter in the compressor cylinder head. The only way to know for sure is to schedule an inspection with a professional air compressor service technician.

    Oil in Discharge Air

    Another obvious sign of trouble is oil in the discharge air at the point of use. Again, there are multiple things that can cause this problem, including worn piston rings, restricted air intake, and excessive oil in the compressor. This can be a serious problem if you use compressed air for fabrication as the oil can contaminate the end products, so schedule air compressor service as soon as you notice oil in the discharge air to prevent costly product loss or production stoppage.

    Insufficient Air Pressure

    You may also begin to notice insufficient air pressure at the point of use if your air compressor requires service. Leaks or restrictions are usually to blame, but it can also be caused by slipping belts or service hoses that are too small. A compressed air service company can determine what’s causing the air pressure drop so you can get back to using compressed air as you need it.

    Preventative Maintenance For Your Air Compressor System And Tips For Draining An Air Compressor Tank

    Tips For Draining An Air Compressor Tank

    Draining your air compressor tank is one of the most important steps of compressor maintenance. Air compressors can become significantly damaged by condensation in their tanks. If you neglect to drain your air compressor tank near San Jose, rust can weaken and damage the interior of your compressor. To drain your air compressor tank, you should turn off your compressor and place it on a slight incline. Next, you can open the drain valve to completely drain the tank. When you are draining your tank, it is important to place a container underneath your compressor to catch any fluid or debris that comes out of your unit. For a closer look at the steps of draining an air compressor tank, check out this informative video from expertvillage.

  • A Look at How Air Compressors Work & Their Advantages

    air compressor for sale in san jose If you are looking for a great way to save time and effort during your construction or carpentry project, you may want to consider purchasing an air compressor. Air compressors are incredibly useful tools that can be used to power air tools and a variety of other attachments. In addition, your air compressor will last you for many years to come. After you purchase an air compressor for sale in San Jose , you will be amazed at your newfound abilities. To highlight the great advantages of purchasing an air compressor, here is an overview of some terrific benefits that air compressors have to offer you.

    Speed Up Work Around the House

    If you are the type of person who prefers to perform maintenance and repairs yourself, you will be amazed at how much an air compressor is able to assist you. A new air compressor can be used to speed up many different projects around the house. For example, you can use your compressor to hang crown molding, finish basement walls, and perform a wide variety of other tasks.

    Ease of Maintenance

    Air compressors are highly powerful machines that are also remarkably easy to maintain. With a few routine maintenance procedures, you can keep your air compressor running well for many future projects. Some of the simple maintenance procedures to keep in mind for your air compressor include draining excess moisture and changing the filter and oil. If you purchase an oil free compressor, your unit will not require oil changes.

    Versatile Tool Selection

    After you select your new air compressor, you will have a versatile range of air tools at your disposal. Depending on your planned projects, you may want to select air nail guns, staplers, or other handy tools. Some other popular tools include air powered sanders, drills, and screwdrivers. With an arsenal of air tools in your toolbox, you will be prepared to tackle any task.

  • Why Your Facility Needs a Customized Compressor Maintenance Plan

    For some companies, air compressors are among the most critical and important of all industrial equipment. That’s why you need a compressor maintenance plan, to make sure your compressed air system continues to work as you need it, when you need it most. However, cut-and-paste maintenance plans don’t take into consideration all the variables that make your compressed air system (and the way you use it) unique. A customized compressor maintenance plan, on the other hand, will take into consideration the size and type of your compressor and how you use it to make sure it receives the maintenance services it absolutely needs.

    If you rely on industrial air compressors for any critical end use, contact D&D Compressor, Inc. of San Jose to make sure your equipment continues to deliver the compressed air you need to maintain productivity, stay competitive, and prevent costly equipment problems. We can customize an air compressor maintenance plan to suit your needs, no matter the type or size of air compressor you currently use. We also supply a full line of air compressor and vacuum pump replacement parts, so if your equipment needs any repairs we can perform them faster than our competitors who have to wait for the parts to arrive. Call us toll-free at (800) 969-0491 to learn more about our air compressor maintenance services and sales. Engineering

  • Compressed Air Energy Savings

    Factories consume approximately 40% of all available energy, and the demands are increasing. Compressed air is responsible for a large share of a factory’s energy consumption, so it makes sense to identify leaks that could be wasting energy—not to mention driving your operating expenses through the roof unnecessarily. Watch this video to learn more about the importance of leak detection testing in industrial compressed air systems.

    If you want to reduce operating expenses, increase productivity, and avoid product and/or critical end use contaminations, work closely with an air compressor company in San Jose to make sure your system is as efficient as possible. As part of an air compressor audit, a company will measure the efficiency of your air compressor and test the air purity to make sure it is safe for its intended use. You might also discover that you stand to save a lot more money in the long run by purchasing a new air compressor system now instead of repairing your old, inefficient one.

  • Food Processing, Compressed Air, and Safety

    Health and safety issues are a big deal in the food industry, and for good reason. Contaminated food products can endanger consumers and cause significant damage to a company’s reputation. Although compressed air is widely used in the food industry, particularly in the packaging and bottling of food, it can be overlooked as a health and safety concern. The potential hazards associated with compressed air are not always obvious, but there are risks that you need to be aware of to make sure that your consumers (and your company) don’t suffer from food contaminated by compressed air. Yellow

    Health and Safety Risks

    Untreated compressed air can contain many potentially harmful contaminants that can spoil food products and cause illness if consumed. The public health crisis resulting from the introduction of microbial contaminants into food packaging or food products can damage your company from a financial standpoint due to damaged public trust and possible litigation from consumers who became ill because of your contaminated food or packaging.

    Managing the Risks

    Compressor filtration is a good start to managing the potential health and safety risks associated with contaminated food products, but it doesn’t go far enough for most food processing and manufacturing plants. Point-of-use filtration should be in place for all critical points where compressed air is directly or indirectly in contact with food and/or food packaging. Point-of-use filtration puts a physical barrier between the air stream and the end product, effectively safeguarding against microbial contamination.

    Food Manufacturing Compressed Air Good Practices

    There are a variety of good practice models for the use of compressed air in food manufacturing and packaging facilities. If you are looking for compressed air “good practice” guidelines to institute in your plant or facility, consider one of these existing collections of standards and regulations:

    • U.S. Code of Federal Regulations (21CFR, Chapter 1, Part 110)
    • British Compressed Air Society (Food Grade Compressed Air Code of Practice)
    • International Featured Standards (Version 6)
    • Global Red Meat Standard (4 th Edition)

  • What are Nitrogen Generators?

    Nitrogen generators are largely used today to inflate automotive tires with nitrogen, but they weren’t initially designed for use in the automotive industry. They were originally designed for use in laboratory and clean room environments, but as more and more uses for nitrogen have been found the variety of applications have greatly expanded. In addition to automotive use, nitrogen generators are used in food manufacturing to prolong product lifetime, as an antioxidant in semi-conductor and electric circuit manufacturing, and for the transportation and transfer of hydrocarbons in the petroleum industry. For high-purity nitrogen demand, a pressure swing adsorption (PSA) nitrogen generators provide up to 99.99% pure N2.

    If you currently use an air separation nitrogen production system, consider substituting your old, outdated equipment with a new PSA nitrogen generator. An industrial air compressor supplier in San Jose can tell you more about the latest nitrogen generators and the benefits of installing a nitrogen generator as opposed to buying bottled or liquefied nitrogen. Researcher

  • Testing Compressed Air in Food Plants

    Preventative food safety has become a major issue in around the world. More and more countries, including the United States, are taking aim at improving the knowledge of risk factors and preventative practices in order to protect consumers and food manufacturers alike. One area that food plants are starting to focus on more than ever is compressed air , specifically the air quality at critical control points in the manufacturing and/or packaging of food. To protect consumers and your company from harm, here are some important things to know about compressed air testing in food plants. Green

    Sources of Compressed Air Contamination

    Before you test the air quality of your compressed air systems, you might first be interested to learn where air gets contaminated in the first place. There are multiple sources of contamination in a compressed air system, including atmospheric contamination (air entering the compressor can be contaminated with water vapor, micro-organisms, atmospheric dirt, etc.) and contamination introduced by the compressor, air receiver, or distribution piping.

    Air Purity Monitoring and Testing Schedule

    Regular air quality monitoring and testing is a best practice within any industry, but it is especially important for food plants. A single test at one point in time is not enough, as compressed air systems are subject to multiple sources of contamination (see above). ISO 8573-7:2003 outlines processes, methods, and best practices of compressed air testing for microbial contamination, including recommended testing schedules.

    HAACP Analysis

    Hazard Analysis Critical Control Point (HACCP) analysis prioritizes air quality testing and filtration at any point-of-use contact between compressed air and food (direct and indirect). Implementing HACCP testing protocols in your food plant is an effective way to mitigate the risks associated with contaminated air. In addition to testing at critical end points, these points of use should contain separate filtration systems or mechanisms to provide additional safeguarding against microbial food contamination.