• Air Compressor Performance During the Winter Season

    Although cold weather air compressor failure isn’t much of a concern in San Jose, you may have air compressors in other parts of California (or other parts of the country) where cold weather performance is an issue. One of the best precautions you can take against cold weather air compressor failure is to install a temperature controlled heating system and electric motor driven insolation dampers on each compressor in use in freezing temperatures.

    When designing an air compressor system , whether here in San Jose or in colder climates, it’s best to discuss your project with engineers who have extensive field experience. Not only will you get expert recommendations regarding the best industrial air compressors for your specific application, but you can learn how to maintain your equipment for optimal performance in any condition. It’s also a good idea to stock up on air compressor repair parts ahead of time so you can anticipate and respond to any problems with minimal delay and equipment downtime.

  • How New Air Compressors Can Help Boost Your Efficiency

    No matter how efficient you might be with the equipment that you have, there is almost always room for improvement. New air compressors near San Jose can help you bring your efficiency to an even greater level, which allows you to cut costs and practice the most environmentally safe techniques. It is important that your new compressors are optimally located and sized. When they are located, sized, and used properly, compressors can keep your production stable and efficient. Continue on to find out how new air compressors can help boost your efficiency.

    Location and Sizing
    Your current air compressor might be a fixture that you recognize from your first day on the job; this could mean that it is impractical or impossible to move it to a different location. If you realize that its current location is not ideal, however, you can make a more educated decision on where to place your new compressor. Stay away from warm areas where contamination is possible or probable; instead, have your new air compressor installed in a clean and cool environment. You should also choose new air compressors that are appropriately sized for your space. This will allow you to use one compressor at a time rather than running multiple compressors simultaneously.

    Leak Elimination and Proper Use
    Like many other tools, old or worn air compressors may be more likely to leak or malfunction. Fortunately newer models are more efficient by design, and might be much less likely to leak than their older counterparts. A new air compressor gives you the opportunity to go cover proper use by yourself and with your employees, which can also reduce waste and increase efficiency.

    Production Stability
    The use of new air compressors can help to stabilize your production and keep your business moving in the right direction. The greater efficiency that they can offer will help to cut down costs when it comes to overall plant operation, and in doing so they can pay for themselves over time. They are also less likely to leak, and thus less wasteful of resources.

  • Tips for Setting up Your Air Compressor

    The first step in using your air compressor in San Jose is setting it up, and it is important that you do so properly. Air compressors that are not setup the correct way can be both difficult and dangerous to work with. Watch this video clip if you would like a few tips for setting up your air compressor.

    There are a handful of components that will fit between your air compressor and the tool you use, and you must assemble them in a specific order. Starting the chain with your compressor, you will attach its coupler to a male plug. You can then fit the male plug into a female adapter, which will then fit snugly into your filter. With the filter as the middle of your chain, you will form the same assembly on the other side and end with your hose. Then connect the hose to your tool.

  • Spotlight on the Latest Energy-Saving BY-PASS from TESEO

    While your industrial air compressors near San Jose may pressurize air in a relatively efficient manner, it is always wise to improve their efficiency whenever possible. Fortunately there are tools and equipment you can use in conjunction with your compressors to save energy and enjoy substantially enhanced efficiency. TESEO has released one such piece of equipment called BY-PASS. Read on as we put the spotlight on the latest energy-saving BY-PASS from TESEO.

    Individuals and corporations that want to increase their savings, decrease their carbon footprints, and make the most of their air compressors might be interested in TESEO’s BY-PASS. Whereas a traditional steel installation may include four T-joints, the BY-PASS instead features two cross-joints. The BY-PASS is also made of aluminum, making it lighter and more economical. This configuration allows for better flow, less pressure drop, and greater energy efficiency. It is also rather compact, which frees up some space in your compressor room and helps to save you money on labor costs. The TESEO BY-PASS features fewer joints, a more compact design configuration, and a greater level efficiency, making it a great choice for just about any compression room that needs an energy efficient boost.

    Energy-Saving By-Pass From Teseo in San Jose

  • Improving Energy Savings with Turbo Blowers

    The movement towards environmental responsibility and energy efficiency has gained a significant amount of traction for many important reasons. These practices show signs of hope for a healthier and more sustainable future. Fortunately you can start now by using energy efficient industrial air compressors in San Jose. Efficient blowers and compressors can save you money, extend the working lives of your tools and equipment, and reduce your carbon footprint. Keep reading if you are interested in learning about the process of improving energy savings with turbo blowers.

    Improving Energy Savings with Turbo Blowers in San Jose

    Addressing Issues
    Many plants have made use of natural gas-fired aeration blowers, and some have used the generated biogas to recycle energy back into the blowers . However, this process still requires a significant amount of natural gas. This system may also lead to problems like excessive levels of ventilation, and it may not work well if you decide to expand your plant. Natural gas-fired aeration blowers might also experience a host of problems that reduce their reliability as well as their efficiency. Fortunately there is another type of blower that can address these issues: the high-speed turbo blower.

    Introducing Replacements
    The high-speed turbo blower features variable speed control, which helps to offer a more energy efficient product that impacts the environment to a lesser degree. These blowers can also thrive over various types of flow, and it is an ideal choice when it comes to expansion. In replacing older natural gas-fired aeration blowers with more compact high-speed turbo blowers, you stand to save a substantial amount of money in energy costs over the course of the following years. There are many different types of high-speed turbo blowers available, and they each boast different advantages; finding one that suits your specific needs is not only possible, but probable as well.

    Exceeding Expectations
    Whether you need to replace a malfunctioning system or you simply feel that it is time for an upgrade, it is highly unlikely that a high-speed turbo blower system will disappoint you. Many plants have been able to save money and energy while reducing environmental impact by using these energy efficient blowers.

  • Choosing an Air Compressor for Your Food Packaging Plant

    When it comes to the food industry, all practices and equipment must be as sanitary as possible. Large food packaging plants typically make use of air compressors near San Jose for a variety of applications, but the specific compressors you choose should be suitable for the task at hand. Compressed air that contacts food or packaging materials directly should be kept as pure as possible in order to avoid contamination and keep customers safe and healthy. Continue on if you would like assistance in choosing an air compressor for your food packaging plant.

    Air compressors are used for an array of different tasks within the food packaging industry, and it is important that the proper type is used in each situation. When you use your air compressor to bring compressed air and food products in direct contact, you have a “contact” system . In order to ensure that the food products that do come into direct contact with pressurized air stay sanitary and safe for consumption, you must use a properly sanitized air compressor. You can ensure that your compressed air is safe by keeping it to an extremely low-pressure dew point so that no microorganisms can grow on the contacted food products.

    Low Risk, No Contact
    Not every process involved with the food packaging industry is equally sensitive. A “Non-Contact Low-Risk” system occurs when your compressed air does not come into contact with food products or the machines that package them. Some plants end up wasting energy and money by using the wrong air compressors in this type of situation. Since the risk is low, not all of the air in the facility must be held to the same dew point standard.

    High Risk, No Contact
    You might find situations where there is no contact between compressed air and food products, yet there is still a high risk of contamination. This may occur when machines use air to create food packages before the food product is actually packaged. In this type of situation, it is wise to use the same type of air compressor and standards as a “contact” situation.

  • Air Compressors in the Auto Repair Industry

    A portable air compressor near San Jose can be useful in a range of different situations. Many mechanics and automobile specialists use either portable or stationary compressors when performing certain vehicle repair jobs. Watch this video for a closer look at air compressors in the auto repair industry.

    Portable air compressors are handy tools when it comes to the auto repair industry. They help auto mechanics perform a multitude of tasks; in some cases, the use of an air compressor is completely necessary in order to finish the job. Air compressors allow you to use air-powered tools like air wrenches, air saws, and muffler cutters. Smaller portable air compressors tend to be on the more affordable side, and they can save the day when you lose power and need to run your compressor off of a generator. If you already have a stationary air compressor in the shop, consider supplementing it with a backup.

  • Your Air Compressor Rental Options

    Whether you need your industrial air compressor in San Jose for packaging food or working on an automobile, you first must come up with the funds to acquire it. Although portable compressors tend to be relatively affordable, some people and businesses have a strict budget to work with. Fortunately you can solve this issue by renting your air compressors from a qualified air compressor rental service. This will allow you to use the latest and greatest products without paying top dollar. Keep reading if you would like to take a look at your air compressor rental options.

    People need air compressors for all kinds of different jobs across various different industries. Whatever you need your air compressor for, consider renting it from D&D Compressor Inc. We can help you save money by renting you our quality air compressors for discounted prices. In addition, we can also help you save money on your energy bills by helping you find the most efficient models and products for your needs. Our preventative maintenance customers always receive around the clock, priority service, and we are happy to help everyone from large corporations to handy individuals. Consider renting your new air compressor from D&D Compressor Inc.

    Air COmpressor in San Jose